ReadyMadeRC
AIMDROIX EVO ONE - QUAD/X8 MULTIROTOR FRAME
| - Frame Size | 615mm (with extended length arms) |
| -Max props size | 14in |
| - Battery space between plates | 220mm x 53mm x 37 m |
Frame configurations:, The frame was designed to be as customizable as possible so that it could be built in many different multirotor configurations. The default frame configuration is a Y6 but it can be built as a quad, quad X8, Y4, V- tail quad and tricopter. This is possible by just installing the optional configuration kits sold separately., Main Frame and landing gear:, The top and bottom plate are stiffened with an innovative aluminum beam stiffeners, which increase the stiffness of the frame plates without the need of standoffs or sandwiched plates. This maximizes the space between the top and bottom plates for a better placement of the ESC and batteries. The integrated landing gear increases the stiffness of the bottom plate and allows two high capacity batteries to be mounted on the sides of the frame. The height of the landing gear can be easily changed by replacing the 8mm carbon fiber leg tubes., Camera mounting system:, The innovative camera mounting system was designed to provide vibration isolation for the camera and video transmitter electronics. The camera plate is mounted on 6 AIMDROIX soft dampers that the takes away the vibrations from the props and motors. The rear support dampening balls are mounted on the top plate brackets so that they are in compression load. This allowed mounting the camera gimbal and FPV camera on front of the plate, away from the top and bottom props view and maintain the plate parallel with respect to the frame plates. The plate was designed to fit the Feiyu Tech FY-G3 brushless gimbal without modifications., Designed for the Aimdroix Aluminum Arms:, The frame was designed to fit the AIMDROIX aluminum arms that have been well proven for many customers around the world. With the optional AIMDROIX arms accessories, it possible to build the most versatile multirotor frame in the market., Key Features:, -Innovative vibration isolated camera system., QUAD Specs:,
Aimdroix EVO ONE Quad The AIMDROIX EVO ONE is the ...ReadyMadeRC
ZEPHYR 3 ZIII KIT
From RiteWing:, Rough info:, 47'' wing span with tons of wing area, very lite and rigid, Kits include:,
Basic build manual located HERE at FPV Lab. Utilizes the ...ReadyMadeRC
KK21 EVO KK2.1.5 FLIGHT CONTROLLER - LARGER LCD SCREEN!
| Mounting Hole Pattern | 45mm x 45mm |
| The second MPU have two modes | ①【WORKING MODE】②【SETTING MODE】 |
How to use the second MPU of KK21EVO:, There is one red and five blue LEDs on the KK21EVO FC board, red LED named “K”connect to the main MCU(ATmega644PA) like the only LED on KK2.1.5, other five blue LEDs connect to the second MPU named “A” “B” “C” “D” “E”from left to right. If only one of five blue LEDs on(other four LEDs off) that mean receiver type of KK21EVO:, TABLE - I A B C D E, “☼” mean LED on, “×” mean off. 【WORKING MODE】LED always on, 【SETTING MODE】LED flash fast If only one of five blue LEDs off (other four LEDs on) that mean AUX channel number from satellite or S.BUS:, TABLE - II A B C D E, MARK:, Except display area more big, KK21EVO‘s LCD is a little different from Hobbyking KK2.1.5, If you flash the firmware of KK2.1.5 maybe the contrast of LCD little dark. We already change all the firmware of KK2.1.5 that we find, you can send a email to then will receive a email include download link. Also can use your KK2.1.5’s flash software or other software like xeltek programmer’s software to edit KK2.1.5’s firmware. You need find “0xEE 0xC8 0x2F 0x24” and change it to “0xEE 0xC8 0x2F 0x23” (change 0x24 to 0x23, this will adjust contrast parameter of LCD). If you can’t find the firmware in our email and can’t change the firmware yourself, send the firmware to we will change and send it back to you., TO SOFTWARE DEVELOPER:, KK21EVO’s contrast of LCD is a little different from Hobbyking KK2.1.5, you need adjust the [V5 voltage regulator internal resistor ratio set, 00100xxx] command of the LCD controller (ST7565),
This is the EVO version of the KK2 flight controller ...ReadyMadeRC
TSLRS TXRX700C - LITE TRANSMITTER AND RECEIVER BUNDLE
| RF input | DIN 4 pin |
| Voltage input | 5-25V |
| Case Size | 85x57x26mm |
| Note | Bundle does |
It comes packed with all the well known features and a lot of new such as:, ,
TxRx700 Lite is the favorite choice for everyone who wants ...ReadyMadeRC
TIGER MOTOR - U7 KV490 V2.0
Specifications:, KV................................................................................................................490,
Configu-ration...........................................................................................12N14P Shaft Diameter.............................................................................................4mm Motor Dimension(Dia.*Len).............................................................Φ60.7×39.5mm Weight(g).....................................................................................................258g ldle current(10)@10v(A).................................................................................1.1A No.of Cells(Lipo)...........................................................................................3-8S ...ReadyMadeRC
SPEKTRUM DX6 6 CHANNEL SYSTEM W/ AR610 RECEIVER
| Modulation | DSM2/DSMX |
| Band | 2.4GHz |
| Receiver | AR610 included |
| Model Memory | 250 |
| Modes | User Selectable Mode 1-4 |
| Transmitter (Tx) Battery Type | 4 AA batteries (Included) |
# of Channels: 6,
The Spektrum™ DX6 has been designed from the ground up ...ReadyMadeRC
3DR - DIY QUAD KIT
Important notes: This kit does not include an RC receiver and transmitter, battery, or battery charger. Please be advised that this kit does not include all the components necessary to connect a Tarot gimbal to the Quad. If you plan to use the, Kit includes:, , Telemetry Radios: Don't forget to add a telemetry radio set below in the appropriate radio frequency for your country. Select,
Build a 2014 Quad with this do-it-yourself kit! The 2014 ...ReadyMadeRC
RMRC-700XV 700TVL ATR CCD (PAL) - CLEARANCE
| Pixels | xxxxx |
ReadyMadeRC
E-FLITE 1S USB LI-PO CHARGER, 300MA EFLC1008
| DC Input | 5.0V 350mA |
| DC Output | 4.2V 300mA |
ReadyMadeRC
BLADE - 180 QX HD BNF WITH SAFE BLH7480A
| Type | Quad-Copter |
| Main Rotor Diameter | 14.0 in (355mm) |
| Gross Weight | 3.35 oz (95 g) |
| Length | 11.5 in (292mm) |
| Motor Size | (4) 8.5mm brushed |
| Kit/ARF/RTF | RTF |
| Minimum Age Recommendation | 14 years |
| Experience Level | Beginner |
| Recommended Environment | Indoor/Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
FATSHARK 600TVL CMOS PAN/TILT CAM V1
| Black | Ground |
| White | Video |
Starting from the red wire:, , Red: 5V, Replacement Servos:,
Light weight FPV Tuned CMOS camera on new pan/tilt mechanism ...ReadyMadeRC
DUBRO ADJUSTABLE CONTROL HORNS (QTY/PKG: 2) #493
,
Our adjustable control horn mounts between two molded nylon pads ...ReadyMadeRC
SIS LABS - DETACH Y6 - FLIGHT CONTROLLER READY
,
Closeout - Please do NOT backorder! If you are looking ...